What is a bearing?
Ball bearing or ball bearings are a type of rotating bearing in the bearing
family. Which is widely used in various tools like anything that spins And
they have computer hard disks and skates and big industries and cars and
motorcycles and so on. Bearings can withstand both radial and axial loads,
and usually in some places Used when the load is relatively small. In a
bearing, apply a load from the outer layer to the items And from there the
pressure is transferred to the inner layer. Given the sphericality of the
spheres, the point Their contact with the inner and outer layers will be very
small (linear or point contact) so they can Move very softly; On the other
hand, due to the small contact area, if too much pressure is applied to the
items Can cause them to deform or crumble, in which case they can be roller
bearings or roller bearings Conical Shape ∗ used.
A special type of bearing is called an axial bearing, which is designed for
low speeds And can not withstand heavy axial loads and examples of
applicationsThey can be used in revolving tables.
.
Bearing operation
In bearings, the load is transferred from the outer layer to the balls And from
the items, pressure is transferred to the inner layer.The sphericity of the
spheres makes their point of contact with the inner and outer layers very small
As a result, they can move very smoothly, on the other hand Small contact area
if they Excessive pressure on the bullets can cause deformation orIt can be
crushed, in which case roller bearings can be used. Imagine we had cylindrical
wheels in your car like tank wheels In these cases, due to the large contact
that the surface had with this wheel, high friction It was going and as a result
the speed of movement was slowing down. The same thing happened in roller
bearing Falls.
As a result, the bearing speed is faster than the roller bearing.If too much
pressure is applied to the bearings, the bullets inside will be crushed Therefore,
from ball bearings that have small bullets at low pressures Used for high
pressure ball bearings Round boards are used, which are called roller
bearingsSomehow it has a thin roller called a needle bearing.
